Steps to install a string
Step 1. Rotate tuning adjustment screw fully counter-clockwise to allow the tuning lever to pivot UP an against the string roller nut (point ’ÄúA’Äù). This ensures that there will be adequate leverage (’Äòmoving room’Äù) to bring the string up to the proper pitch in a later step.
Step 2. Rotate string locking screw counter-clockwise two or three revolutions to allow space for string to pass under the locking strew head.
Step 3. Remove any pieces of broken string form the unit. ESPECIALLY in the changer end. Use a pair of needle-nose pliers to remove the ball-end from the interior mechanism of the changer.
